WBC - successful connections

[Rik]

For me, it's going well:

Your DSL connection rate: 4260 kbps(DOWN-STREAM),  760 kbps(UP-STREAM)
    IP profile for your line is - 3500 kbps
    Actual IP throughput achieved during the test was - 3212 kbps

I've never managed a sustained 3.5M profile before, Max gave me 2.5M, occasionally 3M. Pings are ~22ms.

[Noreen]

Managed to do a BT test this morning (now that I can type @) and got the attached result.

[attachment deleted by admin]

[Rik]

Not bad, almost as good as my 3M throughput.

[Bill]

Managed to do a BT test this morning (now that I can type @) and got the attached result.

Not sure of the "break points" that BT use, but your profile might go up to 17000 after a while. On a 12500-ish sync mine went up to 11000 after about a week.

[Rik]

WBC

9088 - 10207     8.0 Mbps
10208 - 11359    9.0Mbps
11360 - 12479  10.0 Mbps
12480 - 13631  11.0 Mbps
13632 - 14751  12.0 Mbps
14752 - 15903  13.0 Mbps
15904 - 17023  14.0 Mbps
17024 - 18175  15.0 Mbps
18176 - 19295  16.0 Mbps
19296 - 20415  17.0 Mbps
20416 - 21567  18.0 Mbps
21568 - 22687  19.0 Mbps
22688 - 23839  20.0 Mbps
23840+            21.0 Mbps

Bill.

[Bill]

Ta

Looks like Noreen's won't go up then, and I'd better keep an eye on mine... I'm into the 11000 profile band by about 20kbps!

[Rik]

I hate profiles.

[Bill]

I'm not arguing 

[Noreen]

I'm very happy with it as it is.

[PuncH]

Was hoping mine might sneak up to 17000 but syncing at 18575 means I'm a long way off.

Ah well. Will have to put up with things as they are 

[Sebby]

I'm very happy with it as it is.

So would I be!

[Inkblot]

Afte much faffing around with telnet I discovered that my Belkin F5D8631-4 has a Texas Instruments DSLAM as shown here: http://gallery.idnet.com/main.php/v/inkblot/DSLAM.jpg.html

Another thing I found was this: http://gallery.idnet.com/main.php/v/inkblot/MaxSpeed.jpg.html which seems to suggest my max possible speed is 12164kbps - I must get down to Maplin and see if I can get a decent ADSL/Extension lead as Rik suggested, might get me a little bit closer 

[Steve]

Except the best advice is to keep your router attached to the master socket if at all possible so the chances of picking up noise inside the house are minimised . Not always easy but running network cables from your router to your PC or using wifi / homeplugs is the ideal method for preserve a "clean" adsl signal.

[drummer]

I had ADSL2+ activated on my line a month ago and it's still happily plodding along.  Two or three forced resyncs during the first week and two initiated by me, so I reckon a 1400 profile is the best my line can achieve.

Definitely not too shabby though and it certainly warms the cockles of me heart seeing files download at 1.5MB/sec.  

Throughput frequently drops to Max speeds during the day but as I only know this because I've run speed tests, I'm not bothered in the slightest.

To-date, ADSL2+ has been working fine on this line.


--------------------------
Your DSL connection rate: 15989 kbps(DOWN-STREAM),  1120 kbps(UP-STREAM)
   IP profile for your line is - 14000 kbps
   Actual IP throughput achieved during the test was - 13041 kbps
--------------------------
Pinging 212.69.40.3 with 32 bytes of data:

Reply from 212.69.40.3: bytes=32 time=16ms TTL=61
Reply from 212.69.40.3: bytes=32 time=16ms TTL=61
Reply from 212.69.40.3: bytes=32 time=16ms TTL=61
Reply from 212.69.40.3: bytes=32 time=16ms TTL=61

Ping statistics for 212.69.40.3:
   Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
   Minimum = 16ms, Maximum = 16ms, Average = 16ms
---------------------------
Down-Up
Line Attenuation      28.0 db      12.6 db
   Noise Margin      5.9 db        6.3 db
---------------------------

[Sebby]

All looks good.