Dropping out a couple of times

Started by David, Dec 24, 2009, 09:47:04

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2 All
User actions

David

Dec 24, 2009, 09:47:04
Lost connection a couple of times I have no idea what it is but and I hope I get this right this will help pinpoint the issue,if indeed there is one


Port    Status    TxPkts    RxPkts    Collisions    Tx B/s    Rx B/s    Up Time
WAN    PPPoA    3347    4913    0    282    1385    00:34:33
LAN    10M/100M    4961    7868    0    1432    893    00:35:31
WLAN    11M/54M/270M    0    0    0    0    0    00:35:06

ADSL Link    Downstream    Upstream
Connection Speed    5910 kbps    1093 kbps
Line Attenuation    45.0 db    22.6 db
Noise Margin    9.2 db    6.1 db

Not sure this is it will take another look..new router  :whistle:
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

Rik

#1
Dec 24, 2009, 09:48:34
Your noise margin has been increased, David, whether that was before or after migration I'm not sure. It might be worth running routerstats for a while, and see if you van pinpoint what is happening when you re-sync.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

David

#2
Dec 24, 2009, 09:48:55
Its not the log you want is it Rik ?
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

David

#3
Dec 24, 2009, 09:50:22 Last Edit: Dec 24, 2009, 10:13:09 by David
Quote from: Rik on Dec 24, 2009, 09:48:34
Your noise margin has been increased, David, whether that was before or after migration I'm not sure. It might be worth running routerstats for a while, and see if you van pinpoint what is happening when you re-sync.

Nothing everything is OK no loss of speed... :dunno: everything back to normal,if this answers the question,I am not that up on routers
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

Rik

#4
Dec 24, 2009, 09:50:57
Quote from: David on Dec 24, 2009, 09:48:55
Its not the log you want is it Rik ?

From Routerstats, yes.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Simon

#5
Dec 24, 2009, 22:07:13
Quote from: Rik on Dec 24, 2009, 09:48:34
Your noise margin has been increased, David, whether that was before or after migration I'm not sure. It might be worth running routerstats for a while, and see if you van pinpoint what is happening when you re-sync.

If you haven't got a van, I'm sure a Ford Fiesta will do.  :)x  :mxmas:
Simon.
--
This post reflects my own views, opinions and experience, not those of IDNet.

Rik

#6
Dec 25, 2009, 09:13:39
:nana: :lol:
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

David

#7
Dec 25, 2009, 12:12:31
Was off line again this morning  had to reboot,



Port    Status    TxPkts    RxPkts    Collisions    Tx B/s    Rx B/s    Up Time
WAN    PPPoA    2528    3989    0    720    4033    00:14:30
LAN    10M/100M    4966    5544    0    4153    1495    00:15:28
WLAN    11M/54M/270M    0    0    0    0    0    00:15:03

ADSL Link    Downstream    Upstream
Connection Speed    5810 kbps    888 kbps
Line Attenuation    45.0 db    22.6 db
Noise Margin    9.3 db    11.7 db

It not the day for worrying just posting to see if there is anything obvious as I dont know what I am looking at in relation to noise.

I didnt set up the router stat log yesterday...I dont know how... :blush:
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

David

#8
Dec 25, 2009, 12:16:58
Everything seems fine  :dunno:


Many hammer all over the wall and believe that with each blow they hit the nail on the head.

Rik

#9
Dec 25, 2009, 13:04:11
Run Routerstats for 24 hours, David, and see if that can pinpoint what is happening.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

David

#10
Dec 25, 2009, 13:53:22
I dont know how to run them for 24 hours ,have been reading the pages of the router to find out how...googled it no luck....
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

Rik

#11
Dec 25, 2009, 13:56:48
Just leave the machine running, with Routerstats active, turn off the monitor when you're not using the machine.

If you haven't already got a copy, grab one at:

http://www.vwlowen.co.uk/internet/files.htm

http://www.vwlowen.co.uk/moreinternet/files.htm
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

David

#12
Dec 25, 2009, 14:37:31
 :thumb: :thnks: Rik just setting it up,I thought it was something included in router  :blush:
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

David

#13
Dec 25, 2009, 14:48:46
My model is not listed can I just select the Netgear product ?
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

Rik

#14
Dec 25, 2009, 14:50:04
It should work.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

David

#15
Dec 25, 2009, 15:03:31
Off you go and thanks you  :thumb:
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

Rik

#16
Dec 26, 2009, 10:45:34
NP. :)
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

David

#17
Dec 26, 2009, 11:39:09 Last Edit: Dec 26, 2009, 12:01:50 by David
I have run the ststa for 24 hours,trying to work out now how to post the graph ?



Out of interest did the machine need do be left on the whole time ?
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

Rik

#18
Dec 26, 2009, 11:43:15
It did, David. Don't post the graphs, as you'll be at it for ages. Just post the log.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

David

#19
Dec 26, 2009, 12:02:28
Thanks Rik,I did leav it on all night...
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

Rik

#20
Dec 26, 2009, 12:06:01
Yes, basically just turn the monitor off and let it do its thing.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

David

#21
Dec 26, 2009, 12:08:28
Thats what I did,as I have never done this (the graph is still running) the 64,000 dollard question is how to access the log ? is it on the router page or the stats page (logic would asy the stats page) I see log on the right hand side of some tabs then the option to borws ..what am I looking for ?
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

David

#22
Dec 26, 2009, 12:11:42
Sat 26 Dec 2009  12:08:22,    Noise Margin= 9.3, Sync Speed= 5810
Sat 26 Dec 2009  12:08:27,    Noise Margin= 9.3, Sync Speed= 5810
Sat 26 Dec 2009  12:08:32,    Noise Margin= 9.3, Sync Speed= 5810
Sat 26 Dec 2009  12:08:37,    Noise Margin= 9.3, Sync Speed= 5810
Sat 26 Dec 2009  12:08:42,    Noise Margin= 9.3, Sync Speed= 5810
Sat 26 Dec 2009  12:08:47,    Noise Margin= 9.3, Sync Speed= 5810



Is this the thing I am looking for but with yesterdays date start time ?
Many hammer all over the wall and believe that with each blow they hit the nail on the head.

Rik

#23
Dec 26, 2009, 12:13:06
It is. You'll find the log as a .txt file in the folder to which you installed RS, David.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

David

#24
Dec 26, 2009, 12:41:19
I will have a look around Rik the only thing I have is todays and the list is endless.will post when I stumble over the stats..from yesterday
Many hammer all over the wall and believe that with each blow they hit the nail on the head.
Print
Go Up Pages1 2 All
User actions