My Line

[psp83]

I've read in different topics that after X amount of days the exchange equipment should drop the noise margin by 3 and sync increase etc etc.

My router has been connected and not had a resync (from what I know) in 618 hrs or 25 days to everyone else but my line stats have stayed the same..

Do you think my line is "locked" to them settings to keep it stable?

Connection Speed   6318 kbps   1016 kbps
Line Attenuation   40 db   12 db
Noise Margin   11 db   5 db

[Glenn]

Is your router reporting many errors on the connection Paul?

[Steve]

Sometimes the downstream sync is banded and it won't let you sync any higher but your a bit below the top of that band which is 6656

[Rik]

You're not profiled, Paul, DLM is controlling your line. Did you resync this morning?

[psp83]

Is your router reporting many errors on the connection Paul?

How do you tell on a netgear?

[Rik]

Which model?

[psp83]

Did you resync this morning?

Not what I know. 

[Rik]

There was definitely a resync this morning, the previous one was on May 7.

[psp83]

Which model?

DGN2000 & DG834G

[psp83]

There was definitely a resync this morning, the previous one was on May 7.

Probly happened when I was messing around by the router and knocked something.

OR

It could of been when I was changing some settings on the router..

I dont know, I'm not normally with it in the mornings lol..

[Rik]

DGN2000 & DG834G

Kitz is your friend:

http://www.kitz.co.uk/adsl/frogstats.php

[psp83]

[DSL Modem Stats]
        US Connection Rate:     1016    DS Connection Rate:     6318
        DS Line Attenuation:    40      DS Margin:              12
        US Line Attenuation:    24      US Margin:              5
        US Payload :            3097875312      DS Payload:             37186197
92
        US Superframe Cnt :     131264449       DS Superframe Cnt:      13126444
9
        US Transmit Power :     0       DS Transmit Power:      0
        LOS errors:             3       SEF errors:             0
        Errored Seconds:        6496    Severely Err Secs:      3
        Frame mode:             0       Max Frame mode:         0
        Trained Path:           0       US Peak Cell Rate:      2396
        Trained Mode:           16      Selected Mode:          1
        ATUC Vendor Code:       54535443        ATUC Revision:  3
        Hybrid Selected:        1       Trellis:                1
        Showtime Count:         1       DS Max Attainable Bit Rate: 6344 kbps
        BitSwap:                1       US Max Attainable Bit Rate: 1247362 bps
        Annex:                  AnxA    psd_mask_qualifier: 0x0000
        Power Management Status: L0     DS HLINSC: 0
        US ACTPSD:              -345    DS ACTPSD: -366
        Total init. errors:     0       Total init. timeouts: 0
        Showtime init. errors:  0       Showtime init. timeouts: 0
        Last showtime init. errors: 0   Last showtime init. timeouts: 0
        ATUC ghsVid:  b5 00 54 53 54 43 05 10
        T1413Vid: 00 00         T1413Rev: 00            VendorRev: 00
        ATUR ghsVid:  b5 00 54 53 54 43 00 00
        T1413Vid: 00 00 T1413Rev: 00    VendorRev: 00

        [Upstream (TX) Interleave path]
        CRC:    0       FEC:    0       NCD:    0
        LCD:    0       HEC:    0

        [Downstream (RX) Interleave path]
        CRC:    0       FEC:    0       NCD:    0
        LCD:    0       HEC:    0

        [Upstream (TX) Fast path]
        CRC:    3652    FEC:    0       NCD:    0
        LCD:    0       HEC:    3030

        [Downstream (RX) Fast path]
        CRC:    7683    FEC:    0       NCD:    0
        LCD:    0       HEC:    0

[ATM Stats]
        [Upstream/TX]
        Good Cell Cnt:  64539069
        Idle Cell Cnt:  987662415

        Tx Packets Dropped Count:       0
        Tx Bad Packets Count:   2

        [Downstream/RX)]
        Good Cell Cnt:  703820643
        Idle Cell Cnt:  2482777207
        Bad Hec Cell Cnt:       16119
        Overflow Dropped Cell Cnt:      0
        Rx Packets Dropped Count:       0
        Rx Bad Packets Count:   0


[SAR AAL5 Stats]
        Tx PDU's:       18056966
        Rx PDU's:       28224403
        Tx Total Bytes: 2246329142
        Rx Total Bytes: 2901565206
        Tx Total Error Counts:  0
        Rx Total Error Counts:  209

[Rik]

Have you got an uptime to go with that, Paul?

[psp83]

System Up Time 619:59:20

[Rik]

That's LAN presumably, not WAN?

[psp83]

WAN   PPPoA   170255   219539   0   2369   15460   03:37:39

And you was right about the resync this morning.

Wed, 2010-06-02 11:39:44 - LCP down.
Wed, 2010-06-02 11:39:46 - Initialize LCP.
Wed, 2010-06-02 11:39:46 - LCP is allowed to come up.
Wed, 2010-06-02 11:40:07 - CHAP authentication success

[Rik]

Something over 2,000 errors/hour, then, 3-4 a minute. I expect DLM is using the noise margin to keep the line stable.

[psp83]

Something over 2,000 errors/hour, then, 3-4 a minute. I expect DLM is using the noise margin to keep the line stable.

I guess thats bad then  

Thought it was doing something like that as my stats hasn't changed for ages.

Connection Speed   6318 kbps   1016 kbps
Line Attenuation   40 db   12 db
Noise Margin   12 db   5 db

Everytime I get a resync the sync speed doesn't change even if the margin is below the default 15.

Not complaining though, Line seems stable since changing over to ADSL2, More stable than ADSL1, aslongs it stays like it 

[Rik]

It's not bad, Paul, it's just how the system works. You're still doing better than me.

[psp83]

It's not bad, Paul, it's just how the system works. You're still doing better than me.

I'm just wondering if a new line would help. But neighbours get around the same speed, we are on the same pole (left side of house).

I know the pole on the same side of the road but the right side of our house gets better speeds.

[Rik]

There's too many variables for anyone to tell you whether a new line would help - there may be different paths back to the exchange, or a better pair etc.

[psp83]

There's too many variables for anyone to tell you whether a new line would help - there may be different paths back to the exchange, or a better pair etc.

I do like a nice pair! 



Anyways...... 5-6meg is ok for me at the mo.

[Rik]

I'm lucky here. As the first ADSL adopter, I got a kind BT engineer who found the best pair for me.

[psp83]

I'm lucky here. As the first ADSL adopter, I got a kind BT engineer who found the best pair for me.

The last person that looked at my line changed the pair to be a better pair on the pole and said my line was going "the long" way and said he re-routed it a shorter way.

But he also said that the box on the pole was corroded.

[Rik]

No poles, no boxes here, Paul, just aluminium.