2-Wire Logs

Started by Tacitus, Aug 31, 2010, 16:36:56

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Rik

Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Tacitus

To update this thread, I tried the router on Sis line and it synced in 65 seconds!  On that basis it doesn't appear to be the router at fault but something to do with the line or the exchange. 

I left it off overnight as suggested with the BT work going on and again it took some 46 minutes to establish sync at 1280.  At this point it was reporting a SNR of 25dB.  A reboot brought the connection rate up to 2112 and the SNR dropped to 15dB.  Again it reports VCXO at -120 and suggests a hardware frequency mismatch. 

Once the connection is up it generally stays up although the speed is slowly dropping.  Whether this is due to excessive noise or the frequency mismatch I have no idea, but the problem is unlikely to go away.


Rik

Tell support what's happening and what you've done to eliminate the router, Tac.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Tacitus

Quote from: Rik on Sep 09, 2010, 12:27:23
Tell support what's happening and what you've done to eliminate the router, Tac.

Will do Rik  :)