Check BT Exchange Faults

Started by cavillas, Oct 30, 2010, 17:44:52

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

cavillas

I thought that this web page from BT might be of some help for Idnetters.BT Exchange Faults ;D
------
Alf :)

Glenn

Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

.Griff.

"Problem in the North of England, Scotland and Northern Ireland area"

It then lists loads of area codes of which some are nowhere near the North of England, Scotland or NI ?!?!?!?

pctech

Depends if the traffic is routed through the affected nodes Griff as BT routing is bizarre.


.Griff.

Quote from: pctech on Oct 30, 2010, 18:13:26
Depends if the traffic is routed through the affected nodes Griff as BT routing is bizarre.



I think they've simply listed every single area code in the UK. Plymouth (01752) is listed as affected for example and you can't physically get much further away from Scotland, NI and North England than that.

DorsetBoy

Thought the status pages had been posted here previously http://statuspages.co.uk/isps.asp

Ted

Quote from: cavillas on Oct 30, 2010, 17:44:52
I thought that this web page from BT might be of some help for Idnetters.BT Exchange Faults ;D

Yep, I'm on the list. Thanks, Alf.  :thumb:
Ted
There's no place like 127.0.0.1

Steve

It's an odd list with a greater scatter of STD codes throughout the country ,
Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.

Rik

BT's routing is bizarre. My ADSL Max connection routes via West Drayton, my WBC though Milton Keynes.  :dunno:
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Technical Ben

Quote from: Rik on Oct 31, 2010, 12:23:55
BT's routing is bizarre. My ADSL Max connection routes via West Drayton, my WBC though Milton Keynes.  :dunno:
Must be to avoid the congestion charge.  :whistle:
I use to have a signature, then it all changed to chip and pin.

Rik

Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

pctech

Just how many broadband connections do you have Rik?


Rik

Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Glenn

Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

pctech

Quote from: Rik on Jan 22, 2011, 15:43:17
Just the two, Mitch.

Both connected to IDNet or one to a different ISP for resiliency?


Rik

Both IDNet, but one 20CN and one 21CN, which - thanks to BT's weird and wonderful planning - gives resiliency.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Tacitus

Quote from: Rik on Jan 22, 2011, 15:52:26
Both IDNet, but one 20CN and one 21CN, which - thanks to BT's weird and wonderful planning - gives resiliency.

A bit OT but since you have two lines.....   :)  How does bonding work?  For example, must you have two lines dedicated to broadband or can one be broadband only and the other broadband plus phone?

How does it work when you get to the router?  Is there a special multiplexer or is the combination done via a special modem?

Is the cost just 2X the broadband on one line such as (say) each line would have (say) home max on it so the cost would be £51/month or is there an extra for the cost of the bonding.

Just curious  ;D


Technical Ben

For home use, is there really a need for 2? I suppose it's like a hobby right? Such as my friend with 2 TVRs when one is more than enough.  ;D
I use to have a signature, then it all changed to chip and pin.

Rik

Quote from: Tacitus on Jan 22, 2011, 16:01:33
A bit OT but since you have two lines.....   :)  How does bonding work?  For example, must you have two lines dedicated to broadband or can one be broadband only and the other broadband plus phone?

How does it work when you get to the router?  Is there a special multiplexer or is the combination done via a special modem?

Is the cost just 2X the broadband on one line such as (say) each line would have (say) home max on it so the cost would be £51/month or is there an extra for the cost of the bonding.

Just curious  ;D



No answers to any of those, Tac. AFAIK, IDNet don't support bonding. You need a special router, but I don't see why the lines couldn't be used for voice as well, as that's filtered out of the signal.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Rik

Quote from: Technical Ben on Jan 22, 2011, 16:10:52
For home use, is there really a need for 2? I suppose it's like a hobby right? Such as my friend with 2 TVRs when one is more than enough.  ;D

It allows me to keep my post count up, Ben. ;D
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Steve

Dual adsl is either used for backup redundancy or bonding, you need a pair of adsl modems and something like the Firebrick 2700 or a Draytek 2820 and an additional modem to provide the load balancing. I guess businesses  are looking for the increased upload which bonding offers and comparing it to the cost of a leased line. AAISP have some details
Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.

pctech


Glenn

Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Tacitus

Quote from: Rik on Jan 22, 2011, 16:12:48
It allows me to keep my post count up, Ben. ;D

One for each hand...   :)  Thanks for the info on bonding - I just assumed it's something that iDNet would do.  Not that I want to pay £50/month for the privilege  ;D


Tacitus

Quote from: pctech on Jan 22, 2011, 16:50:56
To save you searchiong , here it is http://www.aaisp.net.uk/kb-broadband-bonding.html

Thanks - never thought of looking on AAISP's site....