Struggling to set up again...

Started by peterbeaumont, Dec 08, 2010, 15:49:42

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

peterbeaumont

After some problems with my line, I thought I'd revert to using my 2WIRE Router, but whatever combinations of data input, resets etc. I try, I still keep getting the message "invalid username etc..."

The "username" seems to be defaulting to "greenlight@btclick.com, or something similar...

BT2700HGV
HARDWARE VERSION 2701-100589-005
FIRMWARE VERSION 6.1.1.48.1 enh.tm

Would anyone have any further suggestions, please?

Rik

Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

peterbeaumont

I'd been there just before I posted - I'll try again, in case I made any mistakes.

Glenn

What version of firmware is the router running, Peter?
Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

peterbeaumont


lozcart

Try going to this page  192.168.1.254/xslt?PAGE=HURL13

Enter your username, password*2 and the 2 wire password and click submit.

The router should then try to connect.

peterbeaumont

Thank you, that worked...I think I misread the steps on the "Tripod" instructions.

Now I need to sort out my line problems, I'll probably have to ask for advice on that in the relevant section.