Low speed connection and the frequent disconnects again...

Started by gyruss, Apr 28, 2011, 19:00:55

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

gyruss

Figured it to be polite to open my own thread as i was aware i'd added my own woe's onto other folks threads.    It was asked if i could provide my noise margins and attenuation.   Those are below.  

I've just done a quiet line test and that truly does sound like a not quite tuned radio.  Quiet bouts, but in the main noise.  Oh and did i mention that the last time BT came out they fitted their own faceplate and some kind of secondary filter underneath that?   I had a good winter of connections, which is why I was generally quiet, but now.. its like i'm back to square one.  



ADSL Link
Connection Speed    
Line Attenuation
Noise Margin

Downstream
5344 kbps
40.0 db
10.0 db

Upstream
864 kbps
23.5 db
11 db

For historic and further info:

After the demarcation point, i have the faceplate and extra 'filter' that the BT engineer fitted last year (replacing my ADSLnation faceplate in the process which i'd tried 2 of previously)



My router is a Netgear DG834 v5, and is connected on to this faceplate via a 1 meter length of twisted pair and then the pc's are upstairs and they are connected via a hub to share two pc's.  ALL twisted pair, and not a flat extention cable anywhere.

Oh and here is a half hour sample of my noise margin from routerstats lite:




In the process of my replacing bits here n there i have also entirely replaced every single bit of twisted pair cable also wiht the pro cabling sold by adslnation.

Hmm oh aye, more info, despite the filters n stuff, i get disconnections still when phone calls occur.. thought this was not meant to happen with the faceplate present.

I'm at a loss.  Wits end i suppose i'd describe it, all i want is some kind of stable broadband, given that, i don't have many more needs.

Help me obi-LAN kenobi you're my only hope ! :)
Jase


Glenn

Jase, to me, it sounds like you have an external line joint problem. My BB line would drop when the phone rang, the BT eng re-crimped a couple of connections to fixed the problem.
Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

gyruss

i was getting desparate for ideas as to causes, and i was thinking it could be something like when metal expands in heat.. (like train tracks do).  This external line joint, where is that exactly?  in the green/grey junction box ? in the box just outside my house (the round one), or at the exchange?

I seem to remember the BT engineer did some 'crimping' in the round one outside my frontdoor, last year, but thats all i remember him doing outside of fitting the internal faceplate.
Jase


gyruss



My Broadband Ping

Kept routerstates lite also pinging www.idnet.net  all night too, no idea if this kind of test helps in any way:




and noise margin monitoring from routerstats lite:



Jase


Steve

The variation in ping early evening I'm guessing is due to you using your connection, the noise looks ok until the resync at 9.24 do you know what caused that?
Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.

Glenn

If it is a poor joint, it could be anywhere between your home and the exchange.
Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Ardua

Quote from: Glenn on Apr 28, 2011, 19:19:14
Jase, to me, it sounds like you have an external line joint problem. My BB line would drop when the phone rang, the BT eng re-crimped a couple of connections to fixed the problem.

Glenn - I had a similar problem when my PSTN phone rang and I followed advice on an Aussie forum and fitted an additional ADSL filter on my phone line even though I had just fitted a new ADSL Nation filtered faceplate.

How did you get OR to agree that there was a fault on your line?

Rik

It's easiest if you can hear it on a quiet line test.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Glenn

Quote from: Ardua on Apr 29, 2011, 09:16:38
Glenn - I had a similar problem when my PSTN phone rang and I followed advice on an Aussie forum and fitted an additional ADSL filter on my phone line even though I had just fitted a new ADSL Nation filtered faceplate.

How did you get OR to agree that there was a fault on your line?

Ardua, An engineer was sent out, with the potential for a charge, but he tested the line and confirmed there was a problem. It turned out that the manhole where the joints were made,  was flooded, he cleared the blockage and re-crimped the line. He wanted to use the spare pair, but another engineer had already swapped them, as one was corroded badly and could not support voice traffic.

Since then, after another bout of noise on the line, my connection was sub 150k for a couple of weeks, BT arranged for a new line to be layed under my garden.
Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Ardua

Quote from: Glenn on Apr 29, 2011, 09:52:34
Ardua, An engineer was sent out, with the potential for a charge, but he tested the line and confirmed there was a problem. It turned out that the manhole where the joints were made,  was flooded, he cleared the blockage and re-crimped the line. He wanted to use the spare pair, but another engineer had already swapped them, as one was corroded badly and could not support voice traffic.

Since then, after another bout of noise on the line, my connection was sub 150k for a couple of weeks, BT arranged for a new line to be layed under my garden.

Therein lies the rub. What level of hiss is normal? I was just wondering whether 'my internet disconnects when the phone rings' was a sufficient level of proof? I sense that I would hear the sound of a till rattling if I called OR out.


Rik

If you've gone to the test socket, tried a couple of routers and still get the problem, then you should be OK, but (once again) BT make the rules. :(
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Glenn

I would think anything above a gentle background hum, or anything that interferers with a voice conversation should be enough for BT to detect. The problem on my line though, was the noise was intermittent.
Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

T_M_D

Quote from: Rik on Apr 29, 2011, 09:45:16
It's easiest if you can hear it on a quiet line test.

How do you do a quiet line test?
Tina

Glenn

Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

gyruss

The noise on my phone line is really more than audible when i am talking to a friend on the phone.   I did the ring back test on 17070 and the instant it rang me, my router in the hall went to 'Red Light'. (disconnected)

I think they've stopped the distance to exchange test method now haven't they? or at least they've pin numbered it?

My samknows test (uses google maps) lists my exchange in Chester to be 1322m away.  However, that distance may well be longer as thats just as the crow flies.
Jase


Rik

Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

gyruss

Wired.  have tried 4 phones on this now, the latest one bought it brand new from maplin towards the end of last year.
Jase


Rik

There goes another possible issue. It sounds very much like a line fault.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

gyruss

was fine all winter since that bt chap came out, it went this bad again around the same time the nicer and warmer weather started, but as my router is connected using a 1 meter twisted pair cable (also new and have tried 2 of these), and that it red-lights the way it does, then i can only believe it is a line fault.

but that is where the nightmare starts.. i'm not quite sure why, but BT have become horrendous to deal with over the years.  From the first call to their call centre you get the feeling they are trying to put you off making a fault call, but the last time i had these issues, the engineer who came said to order an SFI via my ISP, so i'm guessing that this would be a much better move to make now.. i've had this long enough now, nearly 4 years in fact.. i have patience, course i do, but even those limits have long since passed :)

Jase


Rik

BT are looking to keep their costs low, hence they show great reluctance to come out, and want to charge an arm and a leg when they do. :(
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

gyruss

Just connected to my router using router stats, noticed the noise margin was incredibly low..



ADSL Link
Connection Speed     
Line Attenuation
Noise Margin

Downstream
4928 kbps
40.0 db
1.5 db

Upstream
832 kbps
23.5 db
11 db
Jase


Rik

Keep routerstats running, it will show you how low the margin can drop before the router resyncs.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Steve

I do sometimes wonder whether being re profiled back to adslmax would give you back some degree of stability but it won't cure the disconnects when the phone rings.
Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.

gyruss

Check my thinkbroadband graph above.. seems to be alot of dropped packets in the early evening area for today.
Jase


gyruss

has to be said tonight has been exceptionally bad connection wise.  I mostly use the net for gaming, but so far tonight its been disconnections every other minute or two..   I run a dual screen setup and the webpages are also unresponsive at these times too.

Jase