Impulse Noise Protection

Started by jezuk1, Aug 16, 2011, 16:05:44

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

jezuk1

Hi all,

The Billion 7800N supports this feature called Impulse Noise Protection which according to one website: "provides a significant improvement in residual bit error rate (BER) as well as resistance against impulsive noise, resulting in a vastly improved user experience for subscribers" etc etc...

Does anybody know much about it and whether the equipment at the other end need to support it too?

Cheers

Rik

No, but I'm sure someone will be along who does. :)
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Steve

As I understand it this is associated with PhyR which has been mentioned on this forum. It relates to a particular feature of the Broadcom chipset but I think the dslam has also got to be compatible.

http://www.broadcom.com/press/release.php?id=1202932

http://www.idnetters.co.uk/forums/index.php/topic,26467.0.html
Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.

jezuk1

Thanks Steve - so I imagine turning this on will have no effect at all (unless BT have added support)  :D
That's correct, it's called PhyR in the web interface and can be enabled for Downstream and/or Upstream channels.

Rik

Come on, BT - you're joking. ;D
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

jezuk1

My SNR margin is quite high (13db Downstream) at the moment, so I suspect my line suffers from this kind of impulse noise.. I would be great to see this feature in operation but as you said Rik it's a slim chance BT will support it  :D  To be honest I'm not even sure if it's worth restarting the router to try, I'd be so surprised!!

Rik

How long has your margin been that high?
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.


jezuk1

Well it was sitting quite happily around 7db for months and then recently it ticked up to 13db and I lost about 3000kbps on the sync speed.
For my relatively low attenuation I get quite a low sync speed, it's never been great - I'm sure I have a bit of a lemon of a phoneline

DMT Status   No Defect
Operational Mode   ADSL2+
Upstream   444
Downstream   12157
SNR Margin(Upstream)   19.5
SNR Margin(Downstream)   12.9
Line Attenuation(Upstream)   11.2
Line Attenuation(Downstream)   21.5

Rik

Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Rik

Quote from: jezuk1 on Aug 16, 2011, 17:10:15
Well it was sitting quite happily around 7db for months and then recently it ticked up to 13db and I lost about 3000kbps on the sync speed.
For my relatively low attenuation I get quite a low sync speed, it's never been great - I'm sure I have a bit of a lemon of a phoneline

Have you done a quiet line test on the voice side?

If your margin has been high for 2 weeks or more with no resyncs, then it would be worth turning it on and forcing a resync, as DLM may have cut your target noise margin.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

jezuk1

QuoteHave you done a quiet line test on the voice side?
Instructions please  :D

QuoteIf your margin has been high for 2 weeks or more with no resyncs
It last resync'd 18 hours ago.. It used to be happy and sit for months without a resync but lately it's resync'ing every few days..

Rik

Dial 17070, select option 2 and listen. You should hear just a background hiss or hum. If there's any crackles, report it as a voice line fault to the line provider.

If it's resyncing that much, you definitely need to be exploring the possibility of noise on the line.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

jezuk1

Next question - do I do all this with the ADSL connected?

Rik

Yes. If you hear noise, disconnect it and see if it stops. If it does, it suggests a faulty filter (unless you have a DECT phone, where you'd also have to consider the base unit might be interacting with the router.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

jezuk1

Yes I can hear crackles on the line, every 30 seconds or so.. Started more after a while
Trying with ADSL offline/disconnected.. Reporting back soon

Rik

Call in a voice fault, don't mention ADSL.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

jezuk1

"Whatever you do, Don't mention the war.. I mean the ADSL"
Understood  :)

Rik

Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

jezuk1

The kind lady did some tests and phoned me back to reveal a groundbreaking discovery that there are no faults detected

Rik

Well, I am surprised. I take it you got no crackles during the call?
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

jezuk1

There were one or two while I was on the call to her and I explained that they seem to come and go so her tests might not reveal anything exciting. I can hear the crackles while doing that quiet test - although they are usually quite faint. It's definitely not a continual hiss, there are audible crackes in the background bubbling away albeit not loud enough to the point where you have to talk over them.

On the plus side - the test caused the DSL to resync and I have gained 2 kbps on my upstream sync speed.
Love it

Rik

Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.