Routerstats

[Niall]

I forgot to mention this before, so here we are

Does anyone know how to get (or even if you can) routerstats (full version) working with the Billion 7800N? I can get the lite version running, but when I set up the full version it wouldn't register anything the router was doing, which baffled me.

Is it just configured wrong, or doesn't it work?

[Steve]

I've not got access to a Windows PC at present but it 'may' work now.

http://www.vwlowen.co.uk/internet/files.htm

http://www.vwlowen.co.uk/internet/routerstats_history.txt

'Some Broadcom routers display their Telnet data slightly differently preventing RouterStats from
          displaying the Connection Speed and Max Sync Rate correctly in the Telnet Summary Window.
          Added a checkbox to the Configure Telnet -> Experimental Page to allow RouterStats to work
          with the alternative display format.
          (See this forum post: http://vwlowen.m3ezw.co.uk/phpBB3/viewtopic.php?f=1&t=318  )"

http://www.billion.uk.com/forum/viewtopic.php?f=9&t=17




If you get stuck I'll try later.

[Niall]

I couldn't get it working at all. Under telnet, when I FINALLY got it to do something, it just had a blank page, and the monitoring page just shows a speed of 0.

Ah well, it's not important, just thought it would be nice to see exactly what is going on, on my line.

[Steve]

It does work Niall, this is the relevant post. http://vwlowen.m3ezw.co.uk/phpBB3/viewtopic.php?f=1&t=318


You need to setup as below and use the text search option with input A , highlight the relevant figures for sync and noise and it seems to work ok for me. Telnet is also working.


For the router search text:

Use this URL for the stats page (or whatever ip address for the router)

Code Select Expand

http://192.168.1.254/status/adslstatus.html

Tick Use source A, get the page and mark the stats that you want

Telnet:

login set to admin and password - cannot see an option to use a different password ?

Change telnet prompt to >

Change chipset, command set to adsl info --stats

Most of the telnet stats and Bits/Tone work except for Up/down connection rate and max rate - displays just 1 or 2 figures (John?)

[Niall]

I might download it again at some point then. It wasn't showing anything when I tried that last. I assume I did something wrong.

[Steve]

It was not straightforward I must admit,I missed "Tick Source A" on the Router text search first time and then the required figures which need highlighting for the graphs need a bit of digging out.