DVD drive tray wont open ?

Started by netn00b, Nov 21, 2011, 11:15:11

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

netn00b

ok not used it for quite some time as everything is online these days.

wanted to put in a Tonka Workshop disc for baby boy and i find the drive wont open....light on and it sounds like its trying to open but its stuck.

any ideas ?!

Simon

Try a pin in the little hole at the side of the tray?
Simon.
--
This post reflects my own views, opinions and experience, not those of IDNet.

Rik

That would be my suggestion too, it sounds like the drawer mechanism has, indeed, become stuck.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

netn00b

ok pushed in a pin and the drive activates and loads the disc that is in it.

but it still is not opening ?

(got a very unhappy baby boy  :bawl:)

Rik

In which case, you probably need to think about buying a new drive, I'm afraid. :( If the power was on at the time, it might be worth trying the pin again with the power off first.
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

netn00b

oh no really ?


the disc which is in it loads fine - so i also need to rescue it somehow !!

Glenn

Push the pin in and hold it there while pressing the button on the drive.
Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

netn00b

ok got it out finally with the old fashioned trick....

brute force! lol

thanks