LINX swapping Foundry/Brocade for Juniper

Started by pctech, Nov 23, 2011, 19:15:16

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

pctech

Nov 23, 2011, 19:15:16
Because I'm interested in such things I occasionally visit the LINX website http://www.linx.net and noticed in their topology section https://www.linx.net/pubtools/topology.html that they are swapping out the Foundry kit (Foundry were bought by Brocade) which formed their primary peering LAN (195.66.224.xx range) for Juniper kit, presumably because the Foundry stuff was getting on a bit  and was getting a tad unreliable.

They do say in their magazine they've installed the latest firmware so hopefully no more issues with BGP.

Just mentioned out of interest really.

Lance

#1
Nov 23, 2011, 22:26:42
Hopefully it will give greater reliability over the old kit.
Lance
_____

This post reflects my own views, opinions and experience, not those of IDNet.

Rik

#2
Nov 24, 2011, 08:30:40
That would be good. :)
Rik
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

esh

#3
Nov 24, 2011, 08:42:13
Can I have the old stuff?
CompuServe 28.8k/33.6k 1994-1998, BT 56k 1998-2001, NTL Cable 512k 2001-2004, 2x F2S 1M 2004-2008, IDNet 8M 2008 - LLU 11M 2011

pctech

#4
Nov 24, 2011, 13:35:25
Best contact LINX but you'd probably need a few mill.

Print
Go Up Pages1
User actions