Billion BiPAC 7800N IP Addresses

Started by psp83, Jan 05, 2012, 14:21:38

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

psp83

Hey All.

I've just got myself a Billion BiPAC 7800N router.

Anyone know where I set the static IP addresses for my internal network ?

Steve

If you want the same IP address to be allocated to a particular device via DHCP you set as a fixed host, this can be found using the advanced menu>configuration>Lan>DHCP server>fixed hosts.( at the bottom of the page)

If you want just a static IP just set them on the NIC outside DHCP server range
Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.

psp83

#2
Thanks Steve.

Basically what I want is this..

Xbox used to be set to 192.168.1.40 on my old router, I want it to be the same on this one.

Same goes for NAS drives, server and printer.

What one would I use for that?

Also I just found this in the PDF.

QuoteStatic ARP
This feature allows you to map the layer-2 MAC (Media Access Control) address that corresponds
to the layer-3 IP address of the device.

Steve

If i.e. Xbox the IP address was previously assigned by a reserved DHCP address, you can reserve the same entry by the fixed hosts feature. If you leave the Xbox NIC on DHCP allocation and  then set 192.168.1.40 as Xbox + Mac address it should always be allocated that address and the same for your other devices i.e. A couple of my fixed host entries

         Mac-Mini   60:33:4b:07:xx:xx   192.168.1.7   
   
    iMac           00:25:4b:a7:xx:xx   192.168.1.15   
   

Note they are outside the default DHCP server range of 100-199


I've not got round to understanding what ARP is yet.
   
Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.

psp83

Cheers. So many options on this router, going to take a lot of reading to understand it.