Draytek Vigor 120 v2 Annex M

Started by caber, Jan 10, 2013, 15:22:25

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

caber

Hello,

I had Annex M enabled on my line yesterday but when I select ADSL2+ Annex M in the Vigor 120's web interface it never manages to sync.  I'm currently using 3.2.6 firmware code 332201.  Has anyone used a Vigor 120 with Annex M before? is there anything I need to change? any feedback would be much appreciated.

Steve

Sorry only used it on adslmax, what happens if you set the modulation on auto?
Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.

caber

Just tried setting it to auto/multimode and it connected as the regular ADSL2+.  Is it worth trying the firmware with different modem codes? I've had a quick search but couldn't find a definitive list of what each code was for.  Also on the ftp - ftp://ftp.draytek.com/Vigor120%20V2/Firmware/V3.2.6/  there is a AnnexA_2 section that I can't seem to find any information on either.  Can anyone shed some light on whether the firmware in there is worth trying?