Every single Internet Explorer at risk of drive-by hacks until Patch Tuesday

Started by Gary, Feb 08, 2013, 14:38:55

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Gary

Just a heads up 'Microsoft has lined up a bumper Patch Tuesday this month to snap shut a backbreaking 57 security vulnerabilities in its products.

Five of the 12 software updates addressing the gaping holes will tackle critical flaws that allow miscreants to execute code remotely on vulnerable systems.

In all, the soon-to-be-patched vulnerabilities exist in the Windows operating system, Internet Explorer web browser, Microsoft Server Software, Microsoft Office and the .NET framework'



http://www.theregister.co.uk/2013/02/08/ms_feb_patch_tuesday_pre_alert/
Damned, if you do damned if you don't

Simon

.NET Framework is a right pita on my machine, and I keep getting prompts to apply updates that have already been applied. 
Simon.
--
This post reflects my own views, opinions and experience, not those of IDNet.

pctech

Sounds like your Windows Update database has been screwed up.


Technical Ben

How many hours should I wait to see if anything gets broken before I dive in myself?  :laugh:
I use to have a signature, then it all changed to chip and pin.

Clive

Outrageous!  They should perform continuous updates like Chrome.

pctech


Simon

Simon.
--
This post reflects my own views, opinions and experience, not those of IDNet.

Glenn

Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.

Simon

Cheers, Glenn, I'll try that and see what happens next time.   :thumb:
Simon.
--
This post reflects my own views, opinions and experience, not those of IDNet.

pctech


Simon

Well, it hasn't helped anyway.  Still getting the .NET Framework updates, which seem to install, then the same updates pop up again.  Like before, I've ticked the boxes to make them go away.
Simon.
--
This post reflects my own views, opinions and experience, not those of IDNet.


Simon

Thanks Mitch, but I've done all that previously.  I think it's a matter of uninstalling and reinstalling .NET Framework, but therein lies the problem in that when I tried to uninstall it, it complained that other applications were reliant on it, and refused to unintall.  I gave up at that point, and I think I need to set aside some time to sort it out properly.
Simon.
--
This post reflects my own views, opinions and experience, not those of IDNet.

Steve

Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.

Den

Mr Music Man.

pctech


Simon

Simon.
--
This post reflects my own views, opinions and experience, not those of IDNet.

pctech

I like it very much as now have it on my work PC too, the interface is much kinder to the eyes when being used for long periods.

Simon

I need more storage, so it's probably time to look for a new PC anyway.  I could just buy an additional hard drive, but when I put this machine together, I buggered up a couple of the infuriatingly delicate SATA connectors, so I'd need to check to see if I have a spare one, and a free power connector.  I guess I could buy an external drive, but find it a bit irritating having to keep turning them on and off, as, for some unknown reason, my PC won't boot up with an external hard drive connected and powered on.
Simon.
--
This post reflects my own views, opinions and experience, not those of IDNet.

Steve

I think you've had nearly five years out of it, so it's not done bad. You could add more SATA slots and power is probably easily solved.
Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.

Simon

Not sure about adding SATA slots - would that be on a PCI card?  If so, that might not be a bad idea, in the short term.  :)
Simon.
--
This post reflects my own views, opinions and experience, not those of IDNet.

Clive

Quote from: Simon on Feb 10, 2013, 21:39:20
I need more storage, so it's probably time to look for a new PC anyway.  I could just buy an additional hard drive, but when I put this machine together, I buggered up a couple of the infuriatingly delicate SATA connectors, so I'd need to check to see if I have a spare one, and a free power connector.  I guess I could buy an external drive, but find it a bit irritating having to keep turning them on and off, as, for some unknown reason, my PC won't boot up with an external hard drive connected and powered on.

You've had your money's worth out of that Simon.  And the satisfaction of building it yourself.  But I don't know how you have managed to fill it up.   :dunno:

Simon

Simon.
--
This post reflects my own views, opinions and experience, not those of IDNet.

Steve

Quote from: Simon on Feb 10, 2013, 22:05:20
Not sure about adding SATA slots - would that be on a PCI card?  If so, that might not be a bad idea, in the short term.  :)

I can't recommend one but you can get PCI and PCI Express SATA cards although make sure you get one with internal ports as a few just have external eSATA ports.

A Molex to SATA power adaptor you may also require.
Steve
------------
This post reflects my own views, opinions and experience, not those of IDNet.

Glenn

Quote from: Simon on Feb 10, 2013, 22:57:03
It's taken five years to fill it up!  ;D

Clean all the junk off it, then download and run Auslogics defragger http://www.auslogics.com/en/software/disk-defrag/ in optimized mode it does a far better job than the windows program.
Glenn
--------------------

This post reflects my own views, opinions and experience, not those of IDNet.