Is there an ongoing issue with 2Wire Router usage ? Im having an issue .

[Dont mention Talk Talk !!]

you see the 4 connection adsl cable rik, I hooked it up to the dlink router and got download speed of 1900kb/sec...............I then hooked the 2 connection adsl cable back up to the dlink and got download speed of 6250kb/sec .

you can probably see why ive held off reconnecting the 2wire router and other adsl cable .

what do you make of that situation ?

James

[kinmel]

I have just checked the cables supplied with an un-used 2700HGV and 2Wire provide an ADSL cable with only the 2 centre terminals visible, so that is the correct one to use.

[kinmel]

Ah, now this is interesting - I did do the reboot, and now syncing much faster, but something is worrying:

Troubleshooting – DSL Diagnostics
General Information
DSL Line (Wire Pair):    Line 1 (inner pair)
Downstream Rate Cap:    8128 kbps
Downstream Atten. at 300kHz:    31.6 dB
Uncancelled Echo:    -16.6 dB    Ok
VCXO Frequency Offset:    -1.4 ppm    Ok
Final Rx Gain:    21.2 dB    Ok
Impulse Noise Comp. Tones:    1    Suspicious - impulse noise detected
Excessive Impulse Noise:    0    Ok
Impulse noise protection:    1.50
Delay of latency path:    8.00 ms

Time                           Line         Rate     Max1     Max2     Max3     Mgn1     Mgn2     Attn     Pwr
08/03/02 11:25:21 GMT     1         4928     4972     4876     4876     15.1     15.0     34.9     19.8

So, has there been any improvement since you stopped the poisoning ?

[Simon]

Well, the sync rate had definitely improved, as can be seen above.  It was less than 4000 before, with the poisoning running.  That said, it seems to have dropped again now, from when I posted the stats you quoted, and I'm still getting this every 4 minutes:

INF       2008-03-04T13:23:20Z      cwmd:  session will be retried in 248517(ms)
INF    2008-03-04T13:27:50Z    cwmd:  retried session started, server: 'https://cwmp.cms.smehomehubrms.bt.com', event code(s): '0 BOOTSTRAP'
WRN    2008-03-04T13:28:50Z    cwmd:  httpc_poll_dispatch - Connection timed out
WRN    2008-03-04T13:28:50Z    cwmd:  session failed...

Also, not sure why, but I've now got two lines of stats, so now I'm even more confuddled:

Time                             Line         Rate     Max1     Max2     Max3     Mgn1     Mgn2     Attn     Pwr     CRCs     FECs     INP     DLY
2008/03/03 22:58:28 GMT     1         4928     4972     3696     3696     15.1     10.0     34.9     19.8     844     12382     1.50     8.00
2008/03/04 17:59:04 GMT     1         3904     3912     4564     4564     15.1     17.0     34.9     19.8     119     2554     1.84     8.00

[Rik]

The first one is the last sync time and data, the second is the current data, Simon.

[Simon]

Ah, so the BT thing last night hit me at 22:58:28, causing the broken sync, yes?  It's actually not too bad at the moment, then, but the SNR has gone up from last night. 

[Rik]

It may have just been a noise resync, Simon, difficult to know unless you check the detailed log or stats for other clues. Paul didn't see a re-sync though, only a PPP drop, iirc.

[Simon]

Perhaps another reboot?  I've got nothing to lose, seeing as I lost the 14 day thing yesterday.

[Rik]

If you're going to reboot, do it in the morning when you'll get the extra speed. There's no advantage to doing it now, I suspect you'd get a similar sync.