Broke 2700's wanted

[Rik]

Get Simon to have a poke around inside his, Dean. That should do the job.

[MoHux]

      

[Rik]

You've been following the PC thread then, Mo.

[MoHux]

           

[kinmel]

Thats why i really want one that someone has broke.

just to see if i can fix it, there must be a way proberly using the j interface (thats what i call it located inside the router)

I am not going to break one on purpose 

Have a read of this post at The Scream, Smiggy seems to be doing the same thing as you.

Read all this topic too

"2wire2700 jtag"  in Google pulls up lots of links worldwide

[g7pkf]

Yes.

read and contributed on those threads

although i am not smiggy i do have other aliases.

the only thing really holding me back is i refuse to "break" a perfectly good router.

hence the requirement for a broke dual ssid (ill even pay poatage)

Dean

G7PKF

[g7pkf]

Any firmwares greatly appreciated.

I have a couple of known to work ones.

but there seem to be a few "claiming" to be the same knocking around.

pm me and ill send out my email of where to send them.

Dean

[g7pkf]

If anyone has any "broke" 2700's with physical faults.
NOT FLASHED A DUAL SSID WITH SBC AND BROKE IT. (although one of these would be nice to see if i can re-flash properly)

And you have had a replacement and got it working.

can i have it please (ill pay postage)?
if you have a psu fine if not do not worry.

Why you may ask? well im trying to get hold of every version of the 2700 for investigation purposes, I have repaired a couple and these are now being used for firmware testing. the more i have the more firmwares i can have on tap for testing. i am particularly trying to get voip working.

so far i have a 2700 single ssid with voip (my main one) and a 2700 single ssid without voip and an 1800 (without voip).

anyone?

PM me.

It costs about £2-£3 (depending on psu or not) to post the cheapest way and i can pay instantly via paypal or send out a cheque (once you know how much postage was).

I gaurantee you won't see them (after i have repaired them-if possible) on fleabay

Cheer's Dean G7PKF...oh and i live nr Milton Keynes

Also if anyone has firmware files can you email me them please?

Still looking for a dual ssid thats been broke!!

this little beasts are great

[Sebby]

I've got a dual-SSID that I'm willing to part with, but it's not broke, so I'd want a sensible sum for it.

[g7pkf]

Ta but got a working 1.
I hate breaking working equipment, looking 4 a broke 1

[Sebby]

I can understand that.

[Mytheroo]

I have 3 2700's. one with maybe a broken solder joint on the adsl port as it 95% of the time goes red when connected. The other two are ok except they connect at 15db snr, and i need 6db. All 3 are branded at&t. I will want to keep at least one but 3 is overkill. I work in MK if this makes things easier

[g7pkf]

I will quite happily take the broke one off your hands.

as i have 3 working ones and if i cannot fix it it will be usefull for rirmware testing (check they load before trashing a good one).

I could pick it up from you monday as i live near MK (and am on holiday Monday).

Regards

Dean

PS sent you a pm with my contact details

[Rik]

We have an MK triumvirate!

[Inactive]

We have an MK triumvirate!

We all have a cross to bear.. 

[Rik]

 

Someone has to be here...

[Mytheroo]

well i don't live there no more, but MK is my ethnicity 

I'll try remember to take it to work on Sunday and it can live there till you're passing, i'll pm the details when i figure out how.
just remembered I only have the one psu, so want to keep that really.